Multistar Elite 2204-2300KV Multi-Rotor Motor (CW Prop Adapter) The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance!
The new Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficiency/power to be optimized. Multistar Elite motors are more than a fancy name and new dark green color.. Built using the highest quality components from Japan bearings, N45SH magnets, .2mm laminations, 180deg oxygen free copper wire, .005g balancing, perfect wind laid down and 100% QC, and then the design of each motor are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration.
Multistar Elite 2204-2300KV Multi-Rotor Motor (CCW Prop Adapter) The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance!
The new Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficiency/power to be optimized. Multistar Elite motors are more than a fancy name and new dark green color.. Built using the highest quality components from Japan bearings, N45SH magnets, .2mm laminations, 180deg oxygen free copper wire, .005g balancing, perfect wind laid down and 100% QC, and then the design of each motor are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration.
Afro ESC 12Amp Ultra Lite Multi-rotor Motor Speed Controller (SimonK Firmware) Version 3. Developed from the ground up, we wanted to build a truly Multi-rotor specific ESC that would offer the best performance and value in the market today.
We wiped the slate clean and looked to the community for inspiration and help in designing an ESC that truly could be known as “The Multi-rotor ESC” Enter Simon and Hamasaki AKA SimonK and timecop. This combination of hardware and firmware expertise in conjunction with the Hobbyking in house engineering team gave us the edge needed to develop an ESC like no other and hence the Afro series was born. Boasting high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and smooth power response the Afro ESC series are set to change the expectations of multi-rotor pilots around the globe. Afro ESC 12Amp OPTO Ultra Lite Multi-rotor Motor Speed Controller (SimonK Firmware) Version 3. This is the OPTO version of the popular 12A V3 Afro, with most flight controllers and FPV gear being able to take higher direct voltage, such as the Naze32 with 16v input ability.
Gemfan 5030 Multirotor Propellers One Pair CW CCW (Orange) Gemfan 5040 Multirotor Propellers One Pair CW/CCW 5X4 (Green) GemFan Propellers have set the gold standard in the small class Multirotor community.
Known for their durability, great balancing and superb hub centering and expendable price. They come packaged as a set of 2, with one CW rotation and one CCW rotation. There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor. These 5X4 will give your Mini FPV quad that extra punch when you have 22mm motors to handle the higher pitch. Note: 5x4 not 5x3 please be aware when ordering.
Specs:Size: 5040 (5x4)Color: GreenHub: 5mm (adapters included for 4mm,3mm,2.5mm) Gemfan 6030 Multirotor Propellers One Pair CW CCW (Orange) Turnigy 9XR Transmitter Mode 1 (No Module) The greatly anticipated Turnigy 9XR has arrived!
The software for the 9XR first began development 6 years ago. Since then it has been tweaked, tuned, changed, updated and revamped by members of the R/C community into a powerful - yet easy to use interface. Our engineers designed the physical product around the R/C communities software changes and input. FrSky DF 2.4Ghz Combo Pack for JR w/ Module & RX. The build quality of this is no where near that of JR, Spektrum or Futaba, but it is adequate.
The PCB of the RX was not mounted flat so the servo pins did not fully line up with the hole in the case. In terms of functions this is perfect, it gains a lock within 1 second, if you switch the tx off and then on, the bind comes back on instantly. Setting the failsafe position is dead easy, just press the rx button for less than one second. One thing to note, there is software available to upgrade this to v2, however, the supplied serial cable will only update the tx module. You need to build or buy another interface to upgrade the rx!! One other thing, the module can support telemetry and non-telemetry rx. Overall, in terms of function this is definitely the 2.4 set to buy. Turnigy 9XR Safety Protected 11.1v (3s) 2200mAh 1.5C Transmitter Pack. AfroFlight Naze32 Acro AbuseMark FunFly Controller. ZIPPY Compact 1300mAh 3S 25C Lipo Pack. ZIPPY Compact 1800mAh 3S 25C Lipo Pack. IMAX B6 50W 5A Charger/Discharger 1-6 Cells (GENUINE) The IMAX B6 is a very advanced charger, able to charge, balance and discharge LiIon, LiPoly, LiFe (A123), NiCd and NiMH batteries.
It is microprocessor controlled just like all the best chargers and will balance the indervidual cells in you Li-XX batteries. It will charge from 0.1 to 5.0A and is capable of charging packs up to 6S packs. It features input voltage protection so as not to flatten your car battery at the field and will also storage charge you packs for when you are not using them. You can power it with any power supply delivering from 11~18V so it is very flexible. This is a GENUINE iMax B6.If you would like a lower priced 6S charger please check our website for other brands.
Specs:Input Voltage: 11~18vCircuit Power: Max Charge 50W - Max Discharge 5WCharge Current Range: 0.1~5.0ADischarge Current Range: 0.1~1.0ANiMH/NiCd Cells: 1~15LiIon/LiPoly Cells: 1~6Pb Battery Voltage: 2~20vWeight: 277gDimensions: 133x87x33mm. Laser230 FPV Quadcopter Composite Kit (230mm) FPV Fiberglass Pan-Tilt Camera Mount L-Size.
HobbyKing® Discovery Buzzer. Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo.