Lark Engineering Co. (India) Pvt. Ltd.
Lark Engineering is a highly recommended company involved in the manufacturing of the Feed Mill Machines in the industry. We specialize in designing and engineering of turnkey projects in poultry, cattle & aqua feed.
Feed Mill Engineering & Manufacturing India. Important Factor in Pellet Feed Quality & Production. Pellet quality is usually expressed as the Pellet Durability Index(PDI) and measured by using a tumbling can device, in which the pellet sample to be tested is first sieved to remove fines, then tumbled in the tumbling can devise for a defined period of time.
Then after tumbling, we compare the fines produced during tumbling with actual weight. At PDI lower than 85 pellet tends to break during crumbling; producing more fines which result in more recycling of feed and low final output. Factors that affect PDI are: 1. Formulation: In today’s dynamic world, Nutritionists face the challenge of formulating feeds using available raw materials at the lowest possible cost while meeting the feed specifications, while the production managers face the challenge of producing the good quality pellets from these ingredients at the optimum mill setting. Raw materials affect pellet quality depending on their “binding properties” and its proportion in the formulation. 2. 3. 1. 2. 2-2.5 Kg/Cm2 after PRV 3.
Feed Mill Machinery Manufacturer in India. Feed mill production; is hard to define as it is a combination of so many factors.
Few Factors are as mentioned: 1.1.1) Feed Formulation & Raw material quality: a. Fiber High fiber reduces the rate of production, as fiber is hard to compress into a pellet. Advantages of Pellet Feed Over Mash Feed in Broiler Farming. So, the approximate cost for the complete project of 2 TPH mash feed plant is 36 lakh, without taking into consideration the working capital and raw material inventory.
The difference in the Plant Cost The difference between setting up the cost of a pellet feed plant and a mash feed plant is Cost of pellet feed plant – Cost of mash feed plant 1, 10, 00,000 – 36, 00,000 = 74, 00,000 INR- Which for now can be considered as a saving – In case of mash project ….. If we consider an interest rate of 8% on this amount, the return can be 50,000 INR per month. … (1) Mash Feed Projects in India and Outside India. Double Ribbon Mixer Manufacturer India. Construction : Double Ribbon Screw Mixer with full width discharge bottom provide very fast discharge of mixer and are suitable for plants having mixer fitted at some height (i.e., structure) and have surge bin below it.
Due to fast discharging, segregation at discharge is greatly avoided. These mixers consists of U-shaped horizontal through in which a heavy duty shaft with two ribbons in helix shape at different pitch circle diameter are mounted with the help of arms. The ribbon helix is so shaped that when inside mixing shaft rotates, one ribbon pushes the material in one side while at same time other ribbon pushes the material opposite side. So, particles inside the mixer are given very fast movement and homogenous mix is achieved. Salient Features :Drive system Air-Exchange Pipe And Interlocking Doors: Double Shaft Mixer Manufacturer India. Double shaft paddle mixer, also called Horizontal Non-gravity Mixer, it is an advanced mixer machine with high efficiency, high uniformity, high intensity and low energy consumption.
The machine is widely used for mixing powder-powder and powder-granule, especially suitable for materials with big difference in specific gravity or particle size. This machine is based on weight less zone or fluidized zone mixing technology with many modification at lark Engineering. Mash Feed Plant Manufacturer India. Animal feed consists of different ingredients to make a balanced diet in terms of proteins, carbohydrates, fats, vitamins, minerals and medicines etc.
In manufacturing of feed in mash form, there are few ingredients like DRB, Rice Polish etc which are already available in powder form, while some of these like Grains, Fish, GNE, Soya etc. are available in solid form and has to be converted to granular form to particle size suitable for the animal. For this purpose grinding of these ingredients is carried out with the help of Grinder or Hammer Mill. After converting all the ingredients in the powder form, these have to mix in right proportions to get the homogenous feed. Mixers are employed for this purpose.
Pig Farming and Pig Feed Machines. In comparison to other livestock rearing, the advantages of pig farming are extremely high.
The growth rate of the pig farming business is very high. Within a short span of time, one can increase the quantity of livestock as pigs are the most prolific breeders with high fertility and shorter generation interval. A sow can be bred as early as 8-9 months of age and can farrow twice a year. Feed Mill Engineering & Manufacturing India. Poultry Farming and Poultry Machines. Poultry is one of the fastest-growing segments of the agricultural sector in India with around eight percent growth rate per annum.
The poultry sector in India has undergone a paradigm shift in structure and operation which has been its transformation from a mere backyard activity into a major commercial agro-based industry over a period of four decades. The constant efforts in up-gradation, modification, and application of new technologies paved the way for the multifold and multifaceted growth in poultry and allied sectors. The development is not only in size but also in productivity, sophistication, and quality.
The structure of India’s poultry industry varies from region to region. While independent and relatively small-scale producers account for the bulk of production, integrated large-scale producers account for a growing share of output in some regions.